Stone Cutting Disc
Zhejiang Wanna Industry&Trade Co.,Ltd (TBAW) was established in 1995, As one of the leading abrasive manufacturers in China.
Zhejiang Wanna Abrasive company mainly produces resin bond Cutting Wheels, Grinding Wheels, Flap Disc and Velcro Disc which are applied to cut-off,grinding and polishing.
Why Choose Us
Production Equipment
We have 4 tunnel kilns which controlled by computer. Automatic tunnel kiln will make the quality more the quality more stable and color more consistent.
Quality Services
Our sales team will be in charge of customer service. If there’re any questions about products, you will not only get a quick response from us but also track the process of planning, production, QC, shipment in different stages.
Well-Experienced
As one of the leading abrasive manufacturers in China, we have accumulated a strong and good market trust as well as great customer satisfication over the past two decades.
Benefits of Stone Cutting Disc
Speed
Whether it’s concrete cutting or splitting stone, speed is important in any construction project. The faster you finish the cutting, the better your chances of staying on schedule and within budget. With this in mind, the diamond saw blade is your best bet to finish your project faster. Stone cutting discs are known for their efficiency in creating precise cuts at a fast pace.
Durability
Stone cutting discs are widely celebrated for their durability. Compared to other blades, they have exceptional longevity because of their unique design, which includes a circular steel disk with segments on the outer edge. These segments consist of a combination of diamonds and metal bond powder that are fused together through high heat and pressure. This contributes to the longevity and durability of the diamond saw blade.
Precision
Stone cutting discs provide incredibly precise cuts with less vibration and strain on the concrete structure. This is due to the diamond’s high performance and its ability to evenly distribute the diamonds across the blade. What’s more, stone cutting discs are optimal for cutting through even harder materials such as rebar and stainless steel. The low vibration generated by stone cutting discs also helps to reduce noise pollution when working in an urban setting.
Comfort
Not only are stone cutting discs an ideal choice for any concrete cutting job, they’re also designed with comfort in mind They offer ease of use and an efficient way to get the job done quickly and without creating too much mess. The diamond blade is designed to cut through concrete with minimal chipping and breakages, while also producing significantly less noise than other types of concrete cutting blades.

Choosing The Right Stone Cutting Disc
The Price
For frequent use and larger jobs, it is better to choose a more expensive stone cutting disc as they will deliver a longer life and a lower cost per linear metre of cutting.
Quality and Size of Saw
It is all based around the horsepower and RPM of the tool being used to complete the task. Stone cutting discs are rated to match the RPM of the saws and grinders.
High speed handheld saws and high speed cut-off saws need blades that are rated at higher RPM. Electric wall chasers need different blades from petrol powered ones.
The Material Being Cut
It is most important to correctly identify the material you are going to cut prior to choosing a stone cutting disc. This has a major effect on the cutting speed and life of the stone cutting disc.
Most materials fall into four categories: Hard, Medium to Hard, Medium to Soft and Soft.
The harder the material being cut, the softer the bond holding the diamonds needs to be. This allows the bond to wear and exposes the diamonds to cut the product and releases the diamond before it glazes over and makes the blade useless.
Conversely, when cutting soft materials, it is important to have a strong, hard bond that holds the diamond segments and increases the life of the blade.
Material of Stone Cutting Disc
Aluminum Oxide ls a Common Abrasive
Aluminum oxide is a common abrasive for cutting, grinding and sanding. Aluminum oxide abrasive wheels are effective on steel and iron. This abrasive is typically more economical than other grinding wheel abrasive materials, but usually wears more quickly.
Diamond Abrasives Offer High Durability
Diamond abrasive wheels, including cut-off wheels and blades with a diamond abrasive, cut through masonry, stainless steel, cast iron and more. The hardness of the diamond material gives these abrasive wheels great wear resistance that translates into a long effective lifespan. In addition to stone cutting discs and blades, there are diamond cup wheels that can grind masonry products.
Zirconia Alumina Is a Self- Sharpening Abrasive
Zirconia alumina abrasive wheels are effective for steel, including stainless steel, and are highly resistant to heat. Zirconia alumina grinding wheels are self-sharpening, meaning the particles fracture during use to continually create new, sharp edges. This feature gives zirconia alumina abrasive wheels and grinding wheels a good effective lifespan.
Ceramic Abrasives Self Sharpen and Produce Less Heat
Ceramic or ceramic alumina abrasive wheels also feature a self-sharpening abrasive. The material doesn't create as much friction as other abrasives so it doesn't build up as much heat. Less heat allows the material to last longer and reduces the risk of discoloring the workpiece. Typical applications for ceramic alumina abrasive wheels include grinding stainless steel, tool steel and even titanium.
The Manufacturing Process for Stone Cutting Disc
Stone cutting discs are comprised of very coarse grit particles that are bonded together and in a circular shape. When attached to motorized tools such as bench-grinders and drills, they are spun at varying speeds to sharpen, polish, grind, or create smooth the edges and surfaces on metal and other hard materials. There are a number of different stone cutting discs, from straight wheels, cylinder wheels, to saucer wheels, all with specific uses and functions in mind during the manufacturing process.
The process of manufacturing stone cutting discs begins with the formation of a “log” from a mixture of abrasive grits and resin. Each log or tube is actually comprised of several discs being formed at the same time, but separated with pre-cut PTFE-coated fiberglass fabric separator sheets. After the log is cured in a high-temperature oven, the individual stone cutting discs can be separated from each other because of the PTFE fabric separator sheets in between. The clean release properties of the PTFE coating and the strength of the fiberglass substrate allow for clean, reliable separation. The diameters of the die cut separator sheets vary depending on the size of the end product.












